P20 Series Flow Switch


  • Australian made
  • Supplied with 20mm spigots
  • No metal parts in contact with liquids
  • All position mounting
  • Detects very low flows
  • Robust reliable switch
  • Easy to install
  • High flow through
  • 18 Bar (260 PSI) Pressure rating
  • Very low head loss
  • Many options available


The P20 In line Flow Switch is a simple and reliable flow switch that can detect the flow of liquids or gases in tubes and small diameter pipes.

The P20 can detect either continuous or pulsed flows. Typical applications include monitoring flow in water treatment and irrigation systems, domestic constant pressure system control, gland cooling systems and a myriad of uses in industrial process control. The P20 flow switch gives a simple on or off response to liquid flow.

There are no metal parts in contact with liquids within the switch, so the P20 is ideal for use in aggressive liquids such as seawater, groundwater, acids and many chemical solutions. The standard switch is supplied complete with pipe spigots and unions, for direct fitting into PVC or ABS pipe work. In addition three electrical modules are available that give a wide choice of control options. Each P20 flow switch is supplied complete with 3 pistons, to provide the user with a wide choice of flow switching points.

See the data sheet linked below for more information on the available models in the P20 Series and the ordering codes.

More Information

AutoCAD Drawing


For assistance in choosing the correct product for your needs, check out our Product Selection Guide.